Aubrion React Waterproof Coat - Blue - L

The Aubrion React coat is waterproof to 10,000mm.

The fabric is breathable to 6000g/m2, allowing moisture vapor to escape.

Yes, the generous hood has draw-cord adjustability and is removable via a zipper.

DWR is a finish applied to the fabric's outer surface that causes water to bead up and roll off, preventing the fabric from becoming saturated. The Bionic-Finish® Eco used is a sustainable, fluorine-free option.

Yes, machine wash at 30°C on a gentle cycle with a small amount of liquid detergent. Do not use fabric softener or bleach.

After washing, tumble dry on a low heat for about 20 minutes or iron on a low heat setting (no steam) with a protective cloth. This helps to reactivate the DWR treatment.

While it provides excellent rain and wind protection, its primary function is waterproofing and breathability. For extreme cold, layering with insulating garments underneath would be necessary.

The Durable Water Repellent (DWR) finish may have worn off. Wash the coat according to care instructions and then tumble dry on a low heat or iron on a low heat setting to reactivate the existing DWR. If this does not resolve the issue, apply a new DWR treatment.

Ensure the main zipper is not fully closed if maximum ventilation is required. Check that the jacket is not overloaded with underlayers. While breathable, extreme exertion can still lead to some internal moisture buildup. Ensure the breathability rating is suitable for the activity intensity.

Ensure the fabric storm flap is not caught in the zipper. Gently try to move the zipper up and down. If it remains stiff, apply a small amount of graphite (from a pencil) or a silicone-based lubricant to the zipper teeth.

Tighten the draw-cord around the hood opening to secure it more snugly. If the hood is zipped on, ensure it is fully zipped and properly aligned.