Keychron K2 HE Wireless Mechanical Gaming Keyboard - Black

Magnetic switches offer faster response times, adjustable actuation points for personalized sensitivity, and greater durability as they do not rely on physical contact for registration.

You can customize key actuation points, remap keys, and create macros using the Keychron Launcher web app, which is accessible through your browser.

Yes, the Keychron K2 HE is designed for both Windows and macOS users. It comes with a system toggle switch and includes an extra set of customized keycaps for each operating system.

Dynamic Rapid Trigger allows keys to activate and reset based on the distance they travel, rather than a fixed point. This means instantaneous key registration upon press and immediate reset upon release, enabling faster repeated inputs.

The keyboard supports multipoint connectivity and can connect to up to three devices simultaneously via Bluetooth 5.2.

Yes, the Keychron K2 HE is hot-swappable, meaning you can easily replace the magnetic switches with compatible ones without needing to solder.

The onboard memory (256KB) stores your custom key layouts, macros, and lighting settings directly on the keyboard, so your personalized setup remains the same when you connect to different devices.

To reset the keyboard, unplug the USB cable. Press and hold the `Esc` key, then plug the USB cable back in. Continue holding `Esc` for 5 seconds to perform a factory reset.

Ensure the USB Type-C cable is securely connected to both the keyboard and the device. Try a different USB port or cable. Check if the switch on the back is set to 'W'.

Ensure the keyboard is within range of the receiver/Bluetooth device. Check the battery level and recharge if necessary. For 2.4 GHz, try a different USB port for the receiver. For Bluetooth, ensure no other strong wireless signals are interfering.

If using magnetic switches, ensure they are properly seated. Try hot-swapping the affected switch with a known working one. Check for any debris under the keycap or switch. Ensure the actuation point is set appropriately for the switch.

Cycle through lighting modes using `Fn + K`. Adjust brightness with `Fn + Arrow keys`. Ensure the keyboard firmware is up to date via the Keychron Launcher.

Ensure the switch on the back is set to 'B' (Bluetooth mode). Press and hold the designated `Fn + number` key (1, 2, or 3) for at least 3 seconds until the indicator light flashes rapidly.