3D Printer Filament - Multicolour

This PLA filament typically performs best between 190C and 220C, depending on your printer's extrusion system.

No, the bundle is a clearance inventory assortment, and the specific colors provided depend on current availability.

While a heated bed is recommended for better adhesion and reduced warping, it is not strictly required for small, simple prints.

PLA is a bio-based plastic derived from renewable resources like corn starch, making it more environmentally friendly than traditional oil-based plastics, though it requires industrial composting facilities to break down.

Store in a cool, dry place inside an airtight container or bag with silica gel desiccant packs to maintain material quality.

The spool is designed to fit standard spool holders on most consumer 3D printers. If your printer has a specialized proprietary spool size, you may need a universal spool adapter.

The filament has likely absorbed moisture. Dry the filament in a dedicated filament dryer or a low-temperature oven at 45C for 4-6 hours.

Clean the print surface with isopropyl alcohol, ensure the first layer height is properly calibrated, and consider adding a brim or raft in your slicer.

Check that your print temperature is within the recommended 190C-220C range and verify that the extruder tension is adjusted correctly to prevent slipping.