Rustins Chalky Finish Paint - Windsor White 500ml

It is quick-drying, typically touch dry within 30-60 minutes, depending on temperature and humidity. Recoating is usually possible after 2-4 hours.

Yes, it can be used on interior kitchen cabinets. Ensure the surface is properly prepared and clean. For high-traffic areas, consider a topcoat of clear wax or a water-based varnish for added durability.

Minimal preparation is usually required. However, for very dark or unstable surfaces, or for maximum durability, applying a suitable primer beforehand is recommended. Always test on a small area first.

Apply your desired number of coats. Once the final coat is dry, lightly sand areas like edges, corners, or raised details with fine-grit sandpaper or 0000 steel wool to reveal the layer beneath.

Coverage varies depending on the surface and application method, but typically one litre covers approximately 10-12 square metres.

No, Rustins Quick Dry Chalky Paint is specifically designed for interior use only.

Store in a cool, dry place away from direct sunlight and frost. Ensure the lid is tightly sealed to maintain the paint's quality.

Ensure the surface is properly cleaned and free from dust or grease. Lightly abrade glossy surfaces before application. Test compatibility on a small area first.

Stir the paint thoroughly. Apply thin, even coats rather than one thick coat. Use a good quality brush and maintain a wet edge. Allow sufficient drying time between coats.

Stir the paint well. If still too thick, a very small amount of water can be added (max 10%), but this may affect drying time and finish.

This paint contains wax to help resist finger marks. Ensure the paint is fully cured before heavy handling. For extra durability and protection, consider applying a clear wax polish or lacquer after the paint has dried and cured.