Gorilla Base DIY 10 Ground Screw Kit - Shire - Gorilla Base DIY 10
Gorilla Base DIY 10 is a complete ground screw foundation kit designed to create a strong, raised ...Gorilla Base DIY 10 is a complete ground screw foundation kit designed to create a strong, raised and ventilated base for sheds and garden buildings, without the need for concrete. Installation is quick and mess-free, with no digging and no curing time, so most customers can install the base and assemble their building on the same day. The kit is delivered to your door and can be installed using standard household tools. It includes pre-cut structural timber, ground screws, a reusable driving handle, structural fixings, layout guidance, and clear step-by-step instructions (print and video). The kit creates ten structural frames, each measuring approximately 1.2m x 1.2m, providing a total coverage of up to 14.40 square metres. This makes it ideal for larger garden buildings such as workshops, log cabins and garden offices. Timber can be trimmed for bespoke sizing, and many customers use any extra space for a decked area or access platform. Compared to concrete, Gorilla Base has a much lower environmental impact. Ground screws require minimal ground disturbance and can be removed and reused if the building is relocated. Nationwide delivery is available, with dispatch typically within a few working days. After purchase, the Gorilla team will contact you to confirm suitability and provide any installation support needed.
Shire - Gorilla Base - Ground Screw Foundation Kit - 10 PackFree delivery in 1–3 days£1,308.00Visit shop →
Product Information
Full details
The Gorilla Base DIY 10 is a comprehensive ground screw foundation kit for homeowners needing a strong, raised, and ventilated base for sheds, workshops, log cabins, or garden offices without using concrete. Its key benefit is quick, mess-free installation on the same day, eliminating digging and curing time. A potential caveat is that the kit provides a total coverage of up to 14.40 square metres, which may require trimming for smaller footprints or careful planning for larger areas.
All features
Model Part Number
Gorilla Base DIY 10
Brand
Shire
Extended Product Information
FAQs
Do I need any special tools to install the Gorilla Base DIY 10?
No, the kit is designed to be installed using standard household tools. A reusable driving handle is included in the kit.
How long does installation typically take?
Most customers can install the base and begin assembling their building on the same day due to the quick, mess-free nature of ground screw installation.
What is the maximum size building this kit can support?
The kit provides coverage for up to 14.40 square metres, consisting of ten frames approximately 1.2m x 1.2m each.
Can I trim the timber to fit a smaller space?
Yes, the structural timber is pre-cut but can be trimmed to accommodate bespoke sizing requirements for your specific area.
What happens if I need to move my garden building later?
The ground screws are designed to be removed and reused, allowing you to relocate your building without needing to repurchase foundation components.
Is nationwide delivery available?
Yes, nationwide delivery is available, and dispatch typically occurs within a few working days.
What should I do if I'm unsure about ground suitability?
After purchase, the Gorilla team will contact you to confirm suitability and provide any necessary installation support or advice.
Troubleshooting
Ground screws are difficult to drive into the ground.
Ensure the ground is clear of large rocks or obstructions. If the ground is very hard, consider watering the area beforehand. Use steady, consistent force with the driving handle.
The base frame feels unstable.
Verify that all ground screws are fully and securely installed. Check that all structural fixings are tightened correctly and that the timber frame is square and level.
Missing components in the kit.
Contact the Gorilla customer support team immediately. They will assist with dispatching any missing parts.
Uneven base after installation.
Slight adjustments can sometimes be made by slightly turning screws in or out. For significant unevenness, re-evaluate ground screw placement or consider additional shims if minor adjustments are insufficient.
Pros and Cons
Pros
Fast and easy installation without digging or concrete.
Provides a raised and ventilated base, protecting buildings from moisture.
Environmentally friendly with minimal ground disturbance.
Components are reusable if the building needs relocation.
Suitable for a wide range of garden buildings, including larger structures.
Cons
Requires careful planning for footprints smaller than 14.40 sqm.
Initial cost may be higher than traditional concrete foundations.
Performance depends on stable ground conditions; may not be suitable for exceptionally uneven or unstable terrain without preparation.
Requires manual effort for driving the ground screws.
Setup, Compatibility & Care
Setup:
Site Preparation: Clear the intended area of debris and vegetation. Mark out the desired footprint using the provided guidance.
Ground Screw Installation: Use the reusable driving handle and standard household tools to screw the ground screws into the ground at the marked locations, following the detailed instructions.
Frame Assembly: Attach the pre-cut structural timber to the installed ground screws using the provided fixings to create the base frame.
Building Placement: Once the base is secure, you can begin assembling your shed or garden building directly on the frame.
Compatibility:
Suitable for most level or gently sloping ground conditions. Extremely rocky or waterlogged soil may require professional assessment.
Ideal for sheds, workshops, log cabins, garden offices, and other similar garden structures.
The total coverage is up to 14.40 square metres, with each of the ten frames measuring approximately 1.2m x 1.2m.
Care:
Periodically check the ground screws for any signs of loosening, especially after extreme weather.
Keep the timber frame clean and free from excessive moisture or debris.
Ensure good drainage around the base to prevent water accumulation.
Robert Dyas£1,279.99Visit shop 
B&Q£1,289.00Visit shop 
Homebase£1,308.00Visit shop 
