Shire Gorilla Base DIY 20 - Ground Screw Kit

The kit is designed for standard household tools. You will need a sturdy bar or similar tool to insert through the driving handle for leverage to screw the ground screws in. A saw may be needed if you choose to trim the timber for bespoke sizing.

Installation time varies based on ground conditions and user experience, but most customers can install the base frame in a few hours. This allows for building assembly on the same day.

Yes, the pre-cut timber can be trimmed to accommodate bespoke sizing. The kit provides a framework of up to 28.80 square meters, and you can adapt the timber to fit your specific shed floor plan.

Ground screws work best in firm soil conditions. They are less suitable for very soft, boggy ground or solid rock without preparation. The Shire team can advise on suitability after purchase.

The Gorilla Base has a significantly lower environmental impact. Ground screws cause minimal ground disturbance, require no concrete manufacturing or transport, and can be removed and reused.

Please refer to the product documentation or contact Shire directly for specific warranty information, as warranty details can vary.

Yes, one of the key advantages of ground screws is that they can be removed and reused if you need to relocate your building.

Ensure the ground is free of large rocks or obstructions. If the ground is very hard, consider pre-drilling a small pilot hole or slightly moistening the area. If encountering solid rock, reposition the screw location slightly.

Adjust the depth of individual ground screws by carefully driving them in further or slightly loosening them. Ensure all screws are installed to the correct depth and that the timber frame sits flush.

Double-check the layout guidance and ensure all components are oriented correctly. Minor adjustments may require trimming the timber using appropriate tools, as per the instructions.

Verify that all ground screws are fully tightened and seated correctly. Check that all structural fixings connecting the timber frame are secure. Ensure the building's own anchoring is correctly implemented onto the base.