Tascam FR-AV4 - 4 Track Field Recorder

32-bit float recording provides an extremely wide dynamic range, meaning you don't need to worry about setting precise gain levels. It captures audio without clipping, even with very loud transient sounds, and allows for significant gain adjustment in post-production without loss of quality.

When connected to a compatible camera via HDMI, the FR-AV4 can read the timecode signal embedded in the video feed. This embeds accurate timecode into your audio recording, making synchronization with the video in editing software straightforward and precise.

Yes, the FR-AV4 features a 6-in/2-out USB-C audio interface. This allows you to connect it directly to a computer and use it for recording or playback with DAWs and other audio software.

The FR-AV4 supports SDXC cards. For optimal performance, especially with higher sample rates and bit depths, it is recommended to use cards rated UHS-I U1 or higher.

The FR-AV4 can record up to six tracks: four isolated mono tracks from its inputs, plus a stereo mix of those inputs. These are saved as separate files on the SDXC card.

While the FR-AV4 has excellent built-in preamplifiers, it is designed to be used with professional external microphones connected via its four XLR/TRS combo inputs for the best possible audio capture.

The FR-AV4 can be powered via a USB-C connection (using a power adapter or from a computer) or by using compatible external batteries (e.g., NP-F series, sold separately).

Ensure batteries are correctly installed and charged, or that the USB-C power source is providing sufficient power. Try a different USB-C cable or power adapter.

Verify that microphones or line sources are properly connected to the XLR/TRS combo inputs. Check that phantom power is enabled for condenser microphones. Confirm input levels are set appropriately (or rely on 32-bit float to handle dynamics).

Ensure the SDXC card is properly inserted and formatted using the FR-AV4. Check that the card meets the speed and capacity requirements for your recording format. Try a different SDXC card.

Confirm that the camera is outputting a timecode signal via HDMI and that the FR-AV4 is set to receive timecode via HDMI. Check that the HDMI cable is securely connected at both ends and is functioning correctly.

Ensure Ultra HDDA preamps are functioning correctly. Check for external interference. Verify that input signal levels are within acceptable ranges for the chosen recording bit depth and sample rate.