AEG 6000 SatelliteClean Fully Integrated Dishwasher - E

AirDry technology automatically opens the dishwasher door by approximately 10cm during the final part of the drying cycle. This allows natural airflow to circulate inside, improving drying performance and reducing energy consumption compared to traditional drying methods.

This dishwasher has a large capacity, accommodating up to 14 place settings. This makes it suitable for larger families or for efficiently cleaning dishes after entertaining guests.

Yes, the AEG 6000 features GlassCare® protection, which is specifically designed to gently and safely clean delicate glassware. For best results, use a dedicated delicate wash program and ensure glasses are securely placed in the racks.

This model is equipped with a Beam-on-Floor indicator. A discreet light is projected onto the floor beneath the dishwasher, changing color or turning off to indicate the cycle's progress and when it has finished.

While specific noise levels are not provided, AEG dishwashers often feature an inverter motor, known for contributing to quieter operation compared to standard motors, allowing it to run without significantly disturbing your home environment.

SensorLogic technology uses sensors to detect the soil level and load size of your dishes. Based on this information, it automatically adjusts the water consumption, temperature, and cycle duration to provide optimal cleaning efficiency, saving water and energy.

Check if the spray arms are blocked by dishes or food debris. Ensure filters are clean and properly installed. Make sure dishes are loaded correctly, not obstructing water spray. Verify you are using enough detergent and that it's suitable for your water hardness. Consider using a hotter wash program.

First, check the filter for any blockages and clean it thoroughly. Ensure the drain hose is not kinked or obstructed. If the issue persists, there might be a blockage in the drain pump or household plumbing, which may require professional assistance.

Verify that the dishwasher door is fully closed and latched. Check if the power cord is securely plugged into the outlet and that the circuit breaker hasn't tripped. Ensure a program has been selected and the 'Start' button has been pressed. If a delay start is active, cancel it or wait for the set time.

This can be due to either hard water or using too much detergent. Adjust your rinse aid dispenser setting. If using salt, ensure the water softener setting is correct for your local water hardness. If the cloudiness is permanent, it might be etching, which cannot be reversed. Ensure you're not overloading the dishwasher.

Ensure the AirDry function is enabled in the dishwasher settings (consult your user manual for specific instructions). The door only opens during specific phases of certain cycles, so confirm you're using a compatible program. Make sure there are no physical obstructions preventing the door from opening slightly.