AEG Integrated Dishwasher - GI8200A1SN

At the end of the wash cycle, the dishwasher door automatically opens a small gap. This allows moist air to escape and fresh air to circulate, naturally drying your dishes more efficiently and saving energy compared to using a heating element for drying.

Yes, the ZoneClean feature is designed for this. It allows you to select an intensive cleaning program for the lower basket (ideal for pots and pans) while simultaneously running a gentler program for the upper basket (suitable for glassware).

The AquaSave system optimizes water usage. In certain programs, consumption can be as low as 8.4 litres, making it highly efficient.

The filter system is typically located at the bottom of the dishwasher tub. Remove the filter components, rinse them under running water, and use a soft brush to remove any stubborn debris. Reassemble and replace securely.

SmartSelect Connect allows you to monitor cycle progress, view estimated cycle length, and check energy efficiency ratings via a display panel or a connected app. It offers convenience and better control over your wash cycles.

This AEG dishwasher has a capacity of 13 place settings, making it suitable for medium to large households.

It features 8 programs, including AUTO Sense, Quick 30 Minutes, ECO cycle, and others designed for various cleaning needs and soil levels.

Ensure the door is fully closed and latched. Check that the power cord is securely plugged in and that the circuit breaker has not tripped. Verify that the water supply is turned on.

Check that the spray arms are not obstructed and can rotate freely. Clean the filter system for any debris. Ensure you are using the correct amount of detergent and that it is fresh. Select an appropriate wash program for the level of soiling.

Inspect the door seal for damage or debris. Ensure the dishwasher is level. Check hose connections for tightness and leaks. Do not operate if a significant leak is present; contact service.

Confirm that the AirDry function is enabled. Ensure rinse aid dispenser is full and adjusted correctly. Check that the load is not overcrowded, preventing air circulation. Run a drying cycle with the door slightly ajar if AirDry is not automatically activating.

Ensure dishes are loaded correctly and not blocking the spray arms. Check that the filter is securely in place. Some operational noises are normal; consult the manual if noise is excessive or concerning.