ASUS ROG Strix LC III 360 ARGB Liquid CPU Cooler - White

The ROG Strix LC III 360 ARGB White Edition typically comes with thermal paste pre-applied to the water block. However, it's always good practice to check the product packaging or refer to the manual. If you need to reapply, use a high-quality thermal paste specifically designed for CPU coolers.

You can control the ARGB lighting and customize the LCD screen using the ASUS Aura Sync software, which is available for download from the ASUS website. This software allows you to select lighting effects, adjust brightness, and set up custom animations or data displays.

> Info needed: Warranty period is not specified in the provided product information.

Yes, the radiator can typically be mounted in the front of a compatible PC case, provided there is adequate space and mounting points for a 360mm radiator. Ensure that the tubing length is sufficient for the chosen configuration and that it does not obstruct other components.

No, the 0dB technology means the fans will stop spinning entirely when the CPU temperature is below a certain threshold, providing silent operation. Once the temperature rises above that threshold, the fans will automatically start spinning again to provide cooling.

The LC III series, like the ROG Strix LC III 360 ARGB White Edition, features the latest Asetek Gen7 V2 pump for improved cooling, a rotatable water block for easier installation, and an integrated LCD screen for system monitoring and customization. The LC II series generally lacks these specific advancements.

The water block dimensions are 7.2 cm (W) x 6.1 cm (H) x 7.2 cm (D). Ensure there is sufficient clearance around the CPU socket on your motherboard, especially considering surrounding RAM modules and VRM heatsinks.

Ensure the pump power cable is securely connected to the motherboard or a designated pump header. Check the pump speed in BIOS or software; it should be running. If noise persists, contact support.

Verify that the fan power cables are properly connected to the motherboard or controller. Ensure PWM control is enabled in BIOS/UEFI settings for the fan headers.

Check that the water block is making proper contact with the CPU and that the mounting pressure is adequate. Ensure thermal paste was applied correctly. Verify the radiator and fans are clean and unobstructed. Confirm the pump and fans are running at sufficient speeds.

Confirm that all ARGB cables are correctly connected to the motherboard's ARGB header or a compatible controller. Ensure the ASUS Aura Sync software is installed and configured properly. Try a different ARGB header on the motherboard.

Verify the USB connection for the LCD screen is secure. Ensure the necessary software drivers for the LCD are installed. Restart the PC and check BIOS settings for any related options.