Best current price£30.92from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£30.92Visit shop Lapp Gray H05v-K Installation Wire - 4510062-100 [100 Meters] - Nominal Cross Section Conductor: 0.75 Mm2
Visit shop2 offers from £30.92 - £54.01
View price history by clicking the chart icon.
This Lapp H05V-K 70° installation wire is designed for electricians and installers working on internal wiring of devices, protected routing in and on luminaires, and signaling systems. Its key benefit is the flexible conductor composition for easy installation in confined spaces. A potential caveat is its 70°C temperature rating, which may limit its use in high-heat environments. This grey wire features a fine stranded copper conductor, PVC insulation, and meets CPR Euro fire class eca standards.
| Colour | Grey |
|---|---|
| Model Part Number | 4510062 |
| Brand | Lapp |
H05V-K indicates a harmonized cable type: 'H' for harmonized, '05' for a 500V/300V rating, 'V' for PVC insulation, and 'K' for fine stranded conductor (Class 5).
The maximum continuous operating temperature for this Lapp installation wire is 70°C.
This wire has a nominal cross-section of 0.75mm² and a 500V rating, making it suitable for internal wiring of devices and general signaling. For high-demand appliances, always check the required wire gauge and voltage rating specified by the appliance manufacturer and local electrical codes.
No, this wire is designed for protected internal wiring. It is not rated for direct outdoor exposure, UV resistance, or high moisture environments.
CPR Euro fire class eca (according to EN 13501-6) signifies that the cable meets specific European standards for fire performance, indicating a low contribution to fire growth and spread in its class.
Class 5 conductors are made of many thin strands, making the wire significantly more flexible than solid core wire. This allows for easier pulling through conduits, bending around corners, and fitting into tight spaces without damage.
The outer diameter of this Lapp installation wire is 2.7mm.
Ensure you are using a wire stripper specifically designed for fine-stranded wires. Adjust the stripper setting to avoid cutting into the conductor strands. Alternatively, use a sharp, insulated knife carefully.
Verify that the conductor strands are properly secured within the terminal or connector. Ensure no stray strands are causing shorts. Re-crimp or re-terminate the connection if necessary.
Confirm the correct product is being used (H05V-K is designed for flexibility). Extreme cold can temporarily reduce flexibility; allow the wire to warm to room temperature. Ensure no kinks or damage have occurred during handling.
Check if the wire gauge (0.75mm²) is appropriate for the current load. Ensure the ambient temperature does not exceed the 70°C rating. Verify connections are tight, as loose connections can cause resistance and heat.
Setup:
Compatibility:
Care:
