GoodHome Planed Natural Pine Torus Skirting Board - Brown

You'll need a saw (hand saw or mitre saw), measuring tape, pencil, adhesive or nails/screws, hammer or drill, wood filler, sandpaper, and a cloth.

Yes, but ensure it's properly sealed with paint or varnish to protect it from moisture.

Use a mitre saw to cut the board at a 45-degree angle for inside and outside corners. Measure carefully and make precise cuts.

Use a paint suitable for wood, such as a satin or gloss finish. Ensure the paint is appropriate for interior use.

Use wood filler to fill the holes. Let it dry completely, then sand the area smooth before painting or staining.

Yes, you can stain the skirting board. Ensure the surface is properly prepared and apply the stain according to the manufacturer's instructions.

Wipe it down with a damp cloth to remove dust and dirt. Avoid harsh chemicals.

Ensure the wall surface is clean and dry. Use an appropriate adhesive or ensure nails/screws are long enough and properly set.

Ensure the surface is properly prepared (sanded and primed). Use a suitable primer before painting and allow sufficient drying time between coats.

Use caulk to fill the gaps. Ensure the wall is even, and consider using a flexible adhesive.