Sandtex Olive External Smooth Masonry Paint - 5L

This paint is ideal for exterior smooth masonry surfaces such as brick, render, concrete, and stone.

Coverage can vary depending on the surface porosity and application method, but typically a 5L tin provides sufficient coverage for large areas of exterior walls. Check the product's specific coverage guidance for precise estimates.

This product is specifically formulated for external use and is not recommended for interior applications.

The paint can be applied using a brush or roller suitable for masonry paint. Ensure even application for a smooth finish.

Drying time is typically 4-6 hours, but this can vary based on temperature, humidity, and application thickness. Avoid painting in adverse weather conditions.

A primer is recommended for new or very porous masonry surfaces to ensure optimal adhesion and finish. For previously painted surfaces in good condition, a primer may not be necessary.

Clean brushes and rollers with water immediately after use to prevent the paint from drying on them.

Ensure the surface was properly prepared, clean, and dry before application. Consider using a masonry primer if the surface is new or very porous.

Apply the paint with even, consistent strokes. Avoid overworking the paint. Ensure you are using the correct application tool for masonry paint. Check if the paint was applied too thickly.

Drying times are dependent on temperature and humidity. Ensure you are painting within recommended conditions (avoid damp or cold weather). If drying is still slow, a second coat may need to be postponed until the first is fully cured.

The final colour can be influenced by the surface it's applied to and the lighting conditions. Ensure the surface was not painted over a significantly different colour without adequate priming. Check batch numbers for consistency if multiple tins were used.