Axis F9114 Main Unit - Base unit

The Axis F9114 Main Unit is a base station for a divided network camera system, designed to connect and power up to four Axis F Sensor Units for comprehensive video surveillance.

No, the F9114 Main Unit is a base unit and requires the separate purchase of compatible Axis F Sensor Units and cables to create a complete surveillance system.

The unit supports a resolution of 1920 x 1080 pixels per sensor unit when configured appropriately.

Yes, Axis F Sensor Units and cables can be used with lengths up to 30 meters (98 ft) to provide flexibility in placement.

The Axis F9114 supports H.264, H.265, and M-JPEG video compression formats.

The ignition control allows the unit to manage its power based on the vehicle's ignition status, providing a controlled shutdown to prevent battery drain when the vehicle is off.

The unit can operate in a wide temperature range from -40 °C to 60 °C (-40 °F to 140 °F).

The unit features dust resistance and water resistance, with an International Protection (IP) code of IP3X.

Verify the input voltage is within the 10-48 V range and the power connections are secure. Check for any damage to the power cable.

Ensure sensor units and cables are securely connected to the F9114. Check that sensor units are powered on and functioning. Try reconnecting cables or testing with a known working sensor unit.

Confirm WDR is enabled if available on the connected sensor units. Ensure the sensor unit lens is clean and unobstructed. Check network bandwidth and configuration for potential bottlenecks.

Ensure Axis Edge Vault is properly configured and that the device has been correctly added to your network's authorization list. Refer to Axis documentation for detailed network setup.