Spirit Wood Dye - Black - 250ml

Apply with a clean, lint-free cloth or a brush, ensuring even coverage. Wipe off any excess dye after allowing it to penetrate. Always test on a scrap piece first to achieve the desired effect.

The dye typically dries in approximately 6 hours. However, this can vary depending on environmental conditions such as temperature and humidity. Ensure it is fully dry before applying a topcoat.

No, Liberon Spirit Wood Dye is specifically designed for interior applications and is not recommended for exterior use where it would be exposed to weather elements.

Tools used with Liberon Spirit Wood Dye should be cleaned immediately after use with methylated spirit.

The coverage rate is approximately 8-16m² per liter, depending on the porosity of the wood and the application method.

Yes, the spirit wood dye formula allows you to mix it with methylated spirit or other Liberon Spirit Wood Dyes to create custom shades and tones.

It is particularly effective on dense hardwoods such as oak and mahogany. It also works well on previously finished woods for restoration purposes.

Ensure the wood surface is uniformly prepared and that the dye is applied and wiped off consistently. Multiple thin coats may be more effective than one heavy coat.

Check for any sealers, waxes, or previous finishes on the wood that might be blocking penetration. Sand lightly if necessary to open the wood grain.

For lighter shades, dilute the dye with additional methylated spirit. For darker shades, apply a second coat after the first has dried or use a more concentrated mix. Test on a scrap piece first.

Ensure all excess dye was wiped off promptly after application. If residue persists, it may require light sanding and reapplication.