Sandtex Microseal Exterior Smooth Masonry Paint - Grey

The paint is rainproof in just 1 hour and typically touch dry in 2-4 hours. Recoat after 2-4 hours. Drying times can vary depending on temperature and humidity.

This paint is designed for exterior masonry surfaces such as brick, concrete, and render. Always ensure the surface is clean and properly prepared.

Coverage is typically around 10-12 square meters per liter, but this can vary depending on the surface porosity and application method. Always calculate the area to be painted and buy accordingly.

While not always necessary, priming is recommended for improved adhesion and a more uniform finish, especially on previously painted or porous surfaces.

It is not recommended to apply the paint in extreme temperatures (below 5°C or above 30°C) or in damp conditions. Check the product instructions for specific temperature guidelines.

Clean brushes, rollers, and other equipment immediately after use with water.

The Sandtex Microseal formula is designed to be environmentally conscious and offers low VOC (Volatile Organic Compounds).

This Sandtex Microseal product comes with a 15-year guarantee against weathering, provided it is applied according to instructions.

Ensure proper surface preparation before application. Remove all loose paint and debris. Consider using a primer.

Apply an even coat, avoiding excessive amounts of paint. Multiple thin coats usually give better results than a single thick coat. Ensure the surface is primed and use the correct application tool.

Ensure the surface is clean and dry. Check the weather conditions; avoid application in extreme temperatures or high humidity. Ensure adequate ventilation.

Check the batch number and ensure you are using paint from the same batch. Ensure the surface is primed correctly. Lighting conditions can affect the perceived color.