Setup, Compatibility & Care
Setup
- Rack Mounting: Install the included rack-mounting brackets and hardware to secure the UPS in a standard 19-inch rack (2U space).
- Connections: Connect your equipment to the IEC C13 and C19 outlets. Use the provided power cords.
- Power Input: Plug the UPS into a reliable power source using the provided power cord (C20 coupler).
- Network Configuration (Optional): If using the network management card, connect it to your network and configure its IP address and settings via web interface.
- Software Installation: Install PowerChute Network Shutdown software to monitor the UPS and enable automated shutdown of connected devices.
Compatibility
The Smart-UPS SRT 2200VA RM is compatible with most IT equipment, including servers, network devices, and storage systems. It supports devices with active PFC power supplies due to its pure sine wave output.
Care
- Battery Maintenance: Perform regular self-tests to ensure battery health. Replace batteries every 3-5 years or as indicated by the UPS. Hot-swappable batteries allow replacement without powering down the connected equipment.
- Environmental Considerations: Operate the UPS within the specified temperature and humidity ranges (0 - 40 °C, 0 - 95% relative humidity).
- Cleaning: Clean the unit regularly with a dry cloth. Do not use liquid cleaners.
- Firmware Updates: Regularly check for and install firmware updates to ensure optimal performance and security.