Dulux Trade Super Matt Emulsion Paint 10L - White

Dulux Trade Supermatt is suitable for all interior wall and ceiling surfaces, particularly new plaster that is still drying.

On average, 10L of paint will cover up to 18 m² per litre, but this can vary depending on the surface texture and porosity.

The normal finishing process is two coats of Dulux Trade Supermatt.

The drying time is 4 hours, but recoat after a minimum of 2 hours and a maximum of 4 hours.

Yes, Dulux Trade Supermatt is suitable for use in kitchens and bathrooms, but ensure good ventilation.

Clean brushes and rollers with water immediately after use. Remove as much paint as possible from the equipment before cleaning.

Yes, Dulux Trade Supermatt has a minimal VOC level, making it environmentally friendly.

Store the paint in a cool, dry place, away from extreme temperatures and frost. Ensure the container is sealed properly.

Ensure thorough stirring of the paint. Apply an even coat and avoid over-brushing or over-rolling. Make sure the surface is properly prepared.

Ensure you are applying the paint to a properly prepared surface. Two coats are recommended for optimal coverage. Consider a third coat if the surface is particularly porous or the existing color is very dark.

Apply the paint in thin, even coats, avoiding applying too much paint at once. Ensure your application tools are not overloaded. Check for any dust or debris on the surface.

Ensure proper ventilation in the room. Make sure the temperature and humidity are within the recommended range. Avoid applying thick coats.