Freefoam Black Plain Fascia Board Internal Corner (Single) - Woodgrain Ash

Its primary purpose is to create a neat, weather-tight joint where two fascia boards meet at an internal angle (a corner that turns inwards).

No, this specific fitting is designed only for internal corners. You will need a separate external corner profile for corners that turn outwards.

The PVC-U material is low maintenance. It can be cleaned periodically with mild soap and water to keep it looking its best.

While PVC-U can be painted with specialized paints, the woodgrain finish is designed to be aesthetically pleasing and durable on its own. Painting is generally not required and may void warranties if not done correctly.

Standard tools for PVC-U work are required, including a fine-tooth saw for any necessary cuts, a measuring tape, a spirit level, a drill for pilot holes, and a sealant gun for adhesive application.

The woodgrain ash finish provides a realistic texture and appearance similar to real wood but without the ongoing maintenance like sanding and repainting. It offers greater durability against environmental factors.

Freefoam typically offers a 10-year guarantee on their roofline products, subject to correct installation and maintenance.

Check that the fascia boards were cut to the correct angle and that sufficient adhesive was used. Re-secure with appropriate fixings if necessary.

Ensure surfaces are clean, dry, and free from dust or grease before applying adhesive. Use the recommended Freefoam adhesive for best results.

Ensure only mild detergent and water were used. Harsh chemicals can degrade the PVC-U surface. Polish gently with a soft, dry cloth.

Verify the seal integrity. Reapply adhesive if a gap is present and ensure all fixings are secure. Check for cracks in the fitting itself.