Best current price£0.35from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£0.35Visit shop Fandf 10Se306 Screw Eyes - Zinc Plated 30 X 6G (Bag Of 10)
Visit shop
B&Q£3.65Visit shop B&Q - 10Se254 Screw Eyes Zp 25 X 4Ga Bag 10 Forse254M
Visit shop
The Range£7.55Visit shop Forgefix Zinc-Plated Screw Eyes 65Mm 14 Gauge Pack Of 10 - Zinc Plated
Visit shop56 offers from £0.35 - £9.19
View price history by clicking the chart icon.
1 offer from £2.60
View price history by clicking the chart icon.
This guide introduces the ForgeFix White Screw Eyes, designed for securely attaching cables, wires, and twine to timber and other materials. Featuring zinc plating for enhanced corrosion resistance, these screw eyes offer a reliable fastening solution. While simple to install, it is advisable to drill a pilot hole for optimal performance and ease of use.
| Colour | White |
|---|---|
| Model Part Number | 10SE5512 |
| Brand | Forgefix |
Yes, it is strongly advised to drill a pilot hole. This makes installation easier, prevents the timber from splitting, and ensures a more secure fit. The pilot hole should be slightly smaller than the screw's core diameter.
Yes, the zinc-plated finish provides increased resistance to corrosion, making them suitable for outdoor applications where they may be exposed to moisture and varying weather conditions.
They are designed to screw directly into timber and similar wooden materials. They are also suitable for use with all types of wall plugs, allowing installation into masonry, concrete, and plasterboard.
The '55' refers to the length of the screw eye in millimeters (mm), and '12g' refers to the gauge (thickness) of the screw. A higher gauge number generally indicates a thinner screw, though in traditional imperial gauge systems, it's the opposite. For this product, 12g indicates a specific thickness.
These ForgeFix Screw Eyes are supplied in a bag of 10 units.
While technically possible to paint them, doing so might cover the zinc plating and potentially interfere with its sacrificial corrosion protection properties. If aesthetics require painting, ensure proper preparation and use a suitable metal-compatible paint.
Ensure a pilot hole has been drilled. The pilot hole may be too small or not deep enough. Try a slightly larger or deeper pilot hole.
The pilot hole may be too large. If possible, remove the screw eye and try a slightly smaller pilot hole, or consider moving the installation point slightly. For increased grip, use a wood filler in the existing hole and re-drill a smaller pilot hole after it dries.
The screw eyes are zinc-plated for corrosion resistance. A fine white dust (zinc oxide) is normal and indicates the zinc is working sacrifically. If actual red rust appears, the zinc coating may have been severely compromised or the environment is extremely corrosive. Consider applying a rust-inhibiting primer and paint, or selecting a fastener made from a more corrosion-resistant material like stainless steel for that specific application.
The load applied may exceed the screw eye's capacity. These screw eyes are designed for light to medium duty applications. Ensure the load is appropriate for the screw size (55 x 12g). For heavier loads, consider using larger gauge screw eyes or alternative fastening methods.
These screw eyes require minimal care due to their zinc-plated finish. The zinc acts as a protective layer, resisting corrosion. If you notice a fine white powder on the surface, this is typically zinc oxide, a normal part of the zinc's sacrificial protection process. Simply ensure the screw eye remains firmly fixed in its application. Avoid excessive force or bending, which could compromise the integrity of the material or its coating.
