Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and existing mould. For heavily contaminated areas, treat with a dedicated mould remover first and allow to dry thoroughly. Any flaking paint should be removed.
Application: Stir the paint well before use. Apply with a brush or roller. For best results, apply two coats, allowing adequate drying time between coats (refer to product tin for specific times). Avoid applying in very cold, damp conditions or direct sunlight.
Compatibility: Suitable for most common interior wall and ceiling surfaces, including plaster, masonry, and previously painted surfaces. Not recommended for direct application onto bare, unsealed wood or metal.
Care: Clean the painted surface with a damp cloth. Avoid abrasive cleaners or excessive scrubbing, which can damage the finish. If mould does reappear, it usually indicates an underlying moisture issue that needs addressing.