Best current price£40.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£40.99Visit shop ARA CHOICE Bond It 5 Litre Builders Complete Heavy Duty Floor Paint Brick Red Grey Satin (Brick Red (Satin))
Visit shop1 offer from £40.99
View price history by clicking the chart icon.
The ARA CHOICE Builders Complete Floor Paint in Red Satin is a robust alkyd-based floor coating for interior use. It's ideal for homeowners and facility managers seeking a durable, easy-to-clean finish for concrete, wood, brick, and stone floors subjected to light to medium traffic. While it offers excellent wear resistance and protection against common automotive fluids, its interior-only application is a key limitation to consider.
| Colour | Red |
|---|---|
| Model Part Number | BDFP-MIX |
| Brand | ARA CHOICE |
No, this product is specifically formulated for interior use only and should not be applied to exterior surfaces.
It is designed for light to medium traffic, including pedestrian traffic and occasional use of forklifts and scissor lifts.
Drying times vary based on temperature and humidity. Typically, it is touch-dry within a few hours and ready for a second coat after 16-24 hours. Full cure takes longer.
It is suitable for concrete, wood, brick, and stone floors.
Wipe up spills immediately. For regular cleaning, use a damp cloth with a mild detergent. Avoid abrasive cleaners.
Yes, it offers good resistance to dilute acids, alkalis, and common automotive fluids such as brake fluid, engine cleaners, and diesel.
This specific product is Red Satin. The Builders Complete Heavy Duty Floor Paint line is also available in Grey Satin.
Ensure the surface was properly cleaned, degreased, and dried before application. Re-clean the surface and consider using a suitable primer if necessary.
Check for consistent application thickness. Ensure the paint was stirred thoroughly before use. Apply a second coat if needed, ensuring even coverage.
This could be due to insufficient ventilation, low temperatures, or applying too thick a coat. Improve ventilation, ensure temperature is within the recommended range, and allow more drying time. Consider applying a thinner second coat.
The final sheen can be influenced by application thickness and environmental conditions. Ensure consistent application and drying conditions. Results may vary slightly between batches.
Surface Preparation: For optimal results, all surfaces must be thoroughly cleaned, dry, and free from dust, oil, grease, and any other contaminants. Loose paint or debris should be removed. Ensure good ventilation during application.
Compatibility: This paint is designed for concrete, wood, brick, and stone surfaces. It is intended for interior use only. Do not apply in conditions of high humidity or when the temperature is below 5°C or above 30°C.
Application: Apply using a brush, roller, or spray. Two coats are generally recommended for best results. Allow adequate drying time between coats as per manufacturer instructions.
Care: Clean spills immediately. For routine cleaning, use a damp cloth or a mild detergent solution. Avoid harsh abrasive cleaners that could damage the finish.
