Knightsbridge Fixed GU10 IC Fire-Rated Downlight - Silver

This downlight is tested to BS476 Part 21 & 23 and compliant with Building Regulations Part B (Fire Safety), tested to 30/60/90 minutes for solid wood joists.

Yes, this downlight is IC (Insulation Compatible) rated, meaning it can be safely covered with building insulation.

It is compatible with standard GU10 Halogen lamps and ideal for all retrofit LED and CFL lamps up to 60mm in length.

The spring clip fixings are designed for a recommended maximum ceiling thickness of 30mm.

No, this downlight has an IP20 rating, making it suitable for dry indoor areas only. It is not protected against moisture.

The front ring features a twist-and-lock mechanism allowing for easy lamp replacement without needing to remove the entire fitting.

This model is finished in Silver.

Check that the mains power is on. Ensure the GU10 lamp is correctly installed and functional. Verify electrical connections at the connector block.

Ensure you are using the correct twist-and-lock motion. Check that no debris is obstructing the mechanism. Refer to the lamp manufacturer's guidelines if necessary.

Verify that the spring clip fixings are engaged correctly. Ensure the ceiling material is within the 30mm thickness limit and is sturdy enough to hold the fitting.

Confirm that the unit is installed according to all instructions and that the ceiling void is not obstructed in a way that compromises the fire rating (e.g., by inappropriate materials).