Best current price£279.99from Robert Dyas
Shopping.co.uk recommended and popular offers
Robert Dyas£279.99Visit shop Birlea Phoenix Ottoman Bed - Grey - Oak/Melamine - Single
Visit shop
B&Q£334.00Visit shop B&Q - Single Grey Ottomam Bed 3Ft Storage Bed Frame Phoenix 90Cm
Visit shop99 offers from £279.99 - £499.00
View price history by clicking the chart icon.
The Birlea Phoenix Ottoman Storage Bed Frame in Grey is designed for individuals seeking a stylish and practical sleeping solution with integrated storage. Its primary benefit is the ample under-bed storage accessible via a gas-lift mechanism, ideal for decluttering bedrooms. A key consideration is the requirement for a UK standard mattress and the specific weight limits for both the mattress and the frame.
| Colour | Grey |
|---|---|
| Model Part Number | 5056206663339 |
| Brand | Birlea |
The bed frame requires a UK standard single mattress. It must weigh between a minimum (for piston function) and a maximum of 45 kg, with a recommended maximum height of 23cm.
Lift the bed frame at the designated point (usually the foot end) to activate the gas pistons, which will assist in raising the mattress and base. Ensure the mattress is in place before operating. Lower the base by gently pushing it down until it clicks or locks securely.
The Phoenix Ottoman frame has a maximum weight load capacity of 350 kg.
The gas piston strength is 588 N.
While the frame has a high weight capacity, it is advisable to distribute weight evenly within the storage area and avoid exceeding reasonable limits for stored items to ensure smooth operation of the gas pistons.
Clean the frame using a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
Yes, the Birlea Phoenix Ottoman Storage Bed Frame requires assembly. It is recommended that two people undertake the assembly process.
Ensure the mattress is correctly positioned and within the 45 kg weight limit. Verify that the mattress height does not exceed 23cm. Check that no items are obstructing the mechanism.
Confirm the mattress is on the bed, as pistons require weight to operate. If the issue persists, contact customer support for potential piston inspection or replacement.
Re-check all assembly screws and bolts to ensure they are fully tightened. Ensure the bed is on a level surface.
Make sure the mattress is lifted to its highest point and then carefully pushed back slightly to allow full access to the storage area.
Setup:
Assembly of the Birlea Phoenix Ottoman Storage Bed Frame typically requires two people due to its size and the mechanism involved. Follow the provided assembly instructions carefully, ensuring all bolts and fittings are securely tightened. Pay close attention to the orientation of the ottoman base and the gas piston attachment points.
Compatibility:
Care:
