Bond It Self Leveling Compound - Grey - 20Kg

The Bond It Self Leveling Compound can be applied from 2mm to 50mm in a single layer.

Yes, this compound is suitable for both interior and exterior use.

Yes, this compound is compatible with underfloor heating systems.

Drying times will vary depending on the thickness and environmental conditions. Refer to the product instructions for specific guidance.

Ensure the mixing ratio of water to compound is correct and that the substrate is properly prepared and primed. Also make sure the product isn't past its pot life.

You will need a mixing bucket, drill with a mixing paddle, a gauge rake or trowel, and appropriate personal protective equipment (PPE).

Store the product in a cool, dry place, away from direct sunlight and moisture. The product should be stored in the original unopened container.

Check the mixing ratio of water to compound. Ensure the product is mixed thoroughly, and that the substrate is properly prepared and primed. If the issue persists, the product may be past its pot life.

Ensure the application thickness is within the specified range. Cracking can occur if the compound is applied too thickly. Ensure the substrate is stable before application.

Ensure the substrate is clean, properly primed, and free from contaminants. Check the substrate's porosity and use the appropriate primer type.

Ensure that the mixing water is at the correct temperature. Avoid mixing too much product at once. Be sure to work fast, since the product sets quickly.