Bond it 10Kg Self Levelling Compound - LEVELMASTER

Coverage depends on the thickness of the application. Refer to the product packaging for specific coverage details.

No, this product is designed for interior use only.

The appropriate primer depends on the subfloor material. Consult the primer manufacturer's instructions for the best recommendation.

Allow at least 3-4 hours for foot traffic, depending on the conditions, but always refer to the manufacturer's instructions for complete drying times before applying the final floor covering.

It is generally recommended to apply in a single layer up to 6mm. For thicker applications, consider using a different product or consult the manufacturer for advice.

Ensure the room is not too warm and that there are no strong drafts. Work in smaller sections and consider using a retarder if necessary.

Yes, as long as the floor covering is waterproof and properly installed. Ensure the subfloor is adequately prepared and primed.

Ensure the mix ratio of water to powder is correct. Check for any obstructions or debris on the subfloor.

Ensure the application thickness does not exceed 6mm and that the subfloor is stable. Address any excessive drafts during the drying process.

Check the room temperature and humidity. Ensure adequate ventilation. Consider using a dehumidifier if humidity is high.