Best current price£12.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£12.99Visit shop Cost Wise Women's Mixed Water Butt/Rain Barrel Outlet 1/2" Bsp (21Mm Hole) Adaptor/Connector And Range Of Taps (Kit 8)
Visit shop4 offers from £12.99
View price history by clicking the chart icon.
This Cost Wise Water Butt/Rain Barrel Outlet Adaptor and Tap Kit is designed for gardeners and homeowners looking for an efficient and durable solution to drain water from their storage tanks. Its key benefit is providing a secure, leak-free connection for easy water access. A potential caveat is the 26mm hole size, which may require specific drilling for some installations. The kit includes a solid brass adaptor with a 3/4" BSP thread and a tap, offering a complete package for water management.
| Colour | Multicolor |
|---|---|
| Brand | Cost Wise |
You will need to drill a hole that is precisely 26mm (approximately 1 inch) in diameter for the adaptor to fit securely.
The adaptor is constructed from solid brass, ensuring durability and resistance to corrosion.
Yes, the kit is a comprehensive solution and includes both the brass adaptor and a tap.
The product description specifies the adaptor is solid brass. The tap material is not explicitly detailed but is designed to work with the brass adaptor.
The adaptor features a 3/4" BSP thread, so it is compatible with taps that have a corresponding 3/4" BSP male thread.
The kit includes PTFE tape, which should be applied to the tap's threads before screwing it into the adaptor. Ensure a tight fit for optimal sealing.
If the existing hole is 26mm, it should fit. If it's slightly larger, you may need to use additional sealing methods or a larger washer. If it's smaller, you will need to enlarge it to 26mm.
Ensure the tap is fully tightened onto the adaptor. Re-apply PTFE tape to the tap's male thread and re-tighten. Check the tap's internal washer for wear and replace if necessary.
Tighten the nut on the inside of the water butt. If the leak persists, ensure the hole is clean and the washers are properly seated. Consider adding a suitable sealant to the exterior of the adaptor if minor seepage occurs.
Use a thicker rubber washer or a sealant specifically designed for water contact on the outside of the tank to create a watertight seal around the adaptor.
Verify that the tap has a 3/4" BSP male thread. This kit is specifically designed for this thread size.
Setup:
Compatibility:
Care:
