Polypipe Soil Weathering Apron - White - 110mm

This weathering apron is designed specifically for 110mm nominal size soil pipes.

While designed for Polypipe systems, it is primarily intended for 110mm pipes. However, compatibility with other brands may vary. It is best used with Polypipe's Universal Soil Fittings and Ancillaries range.

The apron supports both push-fit (ring seal) and solvent weld installation methods.

Yes, if you choose the solvent weld installation method, you will need to purchase appropriate solvent cement and primer separately, as they are not included with the weathering apron.

The weathering apron is white.

This product is designed for soil and vent systems in residential applications, typically above ground. For specific underground applications, consult Polypipe's product suitability guidelines.

The apron can be cleaned with a damp cloth and mild soapy water if necessary. Ensure the area around it is also kept clean.

Ensure the pipe end is clean, free from debris, and is indeed a 110mm nominal size. Gently twist the apron as you push it onto the pipe for a smoother fit.

If using push-fit, ensure the rubber seal is correctly seated and the pipe is fully inserted. If using solvent weld, ensure surfaces were properly prepared and sufficient solvent cement was applied. Re-assemble if necessary.

Verify that the apron is the correct component for a 110mm pipe. Check for any damage to the apron's internal fitting or the pipe end. Ensure it is fully seated.