Insulation Roll With Foil - B&Q

The primary benefit is its ability to reflect up to 95% of heat back into the room, helping to reduce heat loss and make rooms warm up faster.

It is recommended to use Wallrock Thermal Adhesive for best results and secure application.

Each roll measures 5m long and 50cm wide, providing 2.5 square metres of coverage.

Yes, it can be applied to most standard interior wall surfaces, provided they are clean, dry, and sound.

Gently wipe the surface with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals.

This product is designed to enhance existing insulation by reflecting heat. It is most effective when used in conjunction with other insulation methods, rather than as a sole insulation solution for severe conditions.

Each roll is 5 metres long and 50 centimetres wide.

Ensure the wall surface is properly prepared (clean, dry, and sound). Use the recommended Wallrock Thermal Adhesive and apply it according to the manufacturer's instructions. Ensure an even and sufficient coat of adhesive.

Smooth the material immediately after application using a clean, dry brush or roller. Work from the center outwards to push out air bubbles. If bubbles persist, you may need to carefully lift and reapply the section.

Use a sharp craft knife or heavy-duty scissors. Make sure the material is taut and supported on a flat surface while cutting. Replace blades frequently for cleaner cuts.

Verify that the foil side is facing the room to maximize heat reflection. Ensure there are no gaps or significant overlaps that could create thermal bridges. Check that the application is smooth and flush against the wall.