Frenchic Al Fresco - Jitterbug - Blue

It's suitable for a vast array of surfaces including furniture, woodwork, laminate, powder-coated radiators, metal, uPVC, ceramic wall tiles (excluding shower areas), kitchen cupboards, front doors, and interior wood and concrete floors.

Frenchic Al Fresco is self-priming, meaning in most cases, a separate primer is not required. However, for very slick or problematic surfaces, a primer might still be beneficial for optimal adhesion.

Two coats are recommended for a long-lasting and durable finish. This also ensures the truest colour representation.

Yes, it is weatherproof and hardwearing, making it ideal for outdoor furniture, front doors, and other exterior projects.

Clean with a damp cloth. For tougher marks, use mild detergent and water. Avoid abrasive cleaners.

A 750ml tin covers up to 12.5m² per coat, so approximately 6m² for two coats. A 250ml tin covers approximately 2m² for two coats.

Yes, it is EN71-3 certified, making it safe for use on children's toys and furniture.

It provides a smooth, matte finish.

Stir the paint thoroughly. If still very thick, a very small amount of water (a teaspoon per litre) can be added, but avoid over-thinning.

Ensure paint is applied in thin, even coats. Use a high-quality brush and maintain consistent application direction. Allow adequate drying time between coats.

Check that the surface was clean, dry, and free from contaminants before painting. For very slick surfaces, consider light sanding or using a suitable primer.

Colour can vary depending on lighting conditions and the surface it's applied to. Ensure at least two coats have been applied for true colour depth. Allow paint to fully cure for colour to settle.