Wirquin Magicflex Elbow - White - 1 1/2"

This elbow fits 1 1/2" pipes (43mm inner diameter).

The elbow is made of materials suitable for plumbing applications.

Apply solvent weld to both the inside of the elbow and the outside of the pipe ends, connect, and allow time to cure.

Check compatibility with the solvent weld you're using. Ensure that it's suitable for the materials of both the elbow and the pipes.

Refer to the solvent weld manufacturer's instructions for the recommended curing time.

Disassemble the joint, clean the surfaces, re-apply the solvent weld, and reassemble, allowing it to cure completely before testing again.

This elbow is ideal for under-sink plumbing, offset connections, and in confined areas.

Yes, white is a common color for plumbing fixtures and blends in with most installations.

Ensure proper solvent weld application. Check for any gaps or insufficient coverage. Re-apply solvent weld and allow sufficient curing time.

Ensure the pipe ends are properly deburred and free of obstructions. Check for proper alignment and use appropriate force while twisting.