Milliput Epoxy Putty - Yellow Grey

Cut equal quantities from each stick and knead them together thoroughly with your fingers until a uniform color is achieved. This usually takes 3-5 minutes.

At normal room temperature (20-25°C), it becomes rock hard in three to four hours. Higher temperatures can reduce the setting time significantly, sometimes to minutes.

Yes, applying gentle heat, such as from a hairdryer on a low setting, can reduce the setting time to minutes.

It is extremely versatile and used for modeling, plumbing repairs, automotive bodywork, caravan and boat repairs, filling gaps, and various industrial and home applications.

> Info needed: While generally excellent for marine and plumbing repairs, specific details on its waterproof rating are not provided. It forms a hard, durable, and generally water-resistant bond suitable for many applications involving moisture.

Store the separate sticks in their original packaging or an airtight container in a cool, dry place to maintain their long shelf life.

> Info needed: The product description does not specify if it's sandable or paintable. However, most cured epoxy putties can be sanded and painted once fully hardened and cured.

The working time varies with temperature. At room temperature (20-25°C), you typically have around 1-2 hours before it becomes too stiff to work with effectively.

Ensure equal parts of both sticks were mixed thoroughly until a uniform color was achieved. Incomplete mixing is the most common cause. Also, verify the ambient temperature is within a reasonable range (e.g., above 10°C). Colder temperatures significantly slow or prevent hardening.

The ambient temperature might be too high, accelerating the setting time. Work faster in warmer conditions, or consider chilling the unmixed sticks briefly before use (not recommended for prolonged periods as it can affect performance). Alternatively, try mixing smaller batches.

Ensure the surface was clean, dry, and free of grease, dust, or loose particles before application. Roughening very smooth surfaces lightly with sandpaper can also improve mechanical bonding. Press the putty firmly onto the surface to ensure good contact.

Continue kneading the two parts together. Inconsistent color indicates insufficient mixing, which will lead to improper curing and poor strength.