Ronseal 10 Year Weatherproof Wood Paint - White - Gloss - 2.5 litre
Offering 10 years of protection for exterior wood, this Ronseal 2-in-1 Wood Paint requires no prim...Offering 10 years of protection for exterior wood, this Ronseal 2-in-1 Wood Paint requires no primer, even on bare wood. It becomes weatherproof in just one hour, providing a quick and effective way to maintain the appearance of doors and windows. The paint is guaranteed not to crack, peel, or blister for a decade. It covers 12 m²/litre and typically needs 2 to 3 coats. Application is best with a synthetic brush. The paint is dry to touch in 1 hour and can be recoated in the same timeframe. For bare wood, light sanding with 120 grit sandpaper is recommended for an even finish, followed by wiping with white spirit. Any holes or cracks should be filled with wood filler. For previously painted wood, sand away any flakes to the bare wood, ideally using an electric sander, and then wipe with white spirit and a damp cloth. Stir the paint thoroughly before application. Apply in the direction of the woodgrain. If painting bare wood, a third coat may be necessary after four hours if the grain is still visible. The final coat will be weatherproof in one hour.
Ronseal 10 Year Weatherproof Satin Wood Paint 2.5L White - No Primer Needed, Weatherproof In 1 Hour, Won't Crack Or Peel (38795) 5010214887958Free delivery in 1–3 days£32.96Visit shop →
Ronseal 10 Year Weatherproof Satin Wood Paint 2.5L White - No Primer Needed, Weatherproof In 1 Hour, Won't Crack Or Peel (38795)Free delivery in 1–3 days£32.96Visit shop →
10 Year Weatherproof Gloss Wood Paint, 2.5L White, 2.5L White, By Ronseal 5010214887828Free delivery in 1–3 days£39.98Visit shop →
Ronseal 10 Year Weatherproof Gloss Wood Paint, 2.5L White, 2.5L White, ByFree delivery in 1–3 days£39.98Visit shop →
very.co.ukRonseal 10 Year Weatherproof Wood Paint White Satin 750Ml
B&Q - 10 Year Weatherproof Wood Paint White Satin Deep Base Exterior Doors & Windows Protector Wood Paint750Ml TinFree delivery in 1–3 days£25.00Visit shop →
B&Q - 10 Year Weatherproof Wood Paint White Satin Deep Base Exterior Doors & Windows Protector Wood Paint2.5L TinFree delivery in 1–3 days£42.00Visit shop →
HomebaseRonseal 2 In 1 10 Year Weatherproof White Gloss Primer Wood Paint 2.5L
Ronseal 2 in 1 Primer Wood Paint - 10 Year Weatherproof - White Gloss - 2.5LFree delivery in 1–3 days£41.00Visit shop →
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking for a durable, long-lasting paint solution for exterior wood. The Ronseal 10 Year Weatherproof Wood Paint offers a premium finish that protects doors and windows for a decade without cracking, peeling, or blistering, even on bare wood. A key benefit is its 2-in-1 formula, eliminating the need for primer. The main caveat is that achieving the full 10-year protection may require up to three coats, especially on bare wood, and proper surface preparation is crucial.
All features
Colour
White
Model Part Number
38782
Brand
Ronseal
Extended Product Information
FAQs
Do I need a primer for this paint?
No, this is a 2-in-1 paint and does not require a separate primer, even on bare wood.
How many coats should I apply?
Generally, 2 coats are recommended. However, for bare wood, or if the wood grain is still visible, a third coat may be necessary for full protection.
How long does it take to dry?
The paint is dry to the touch in 1 hour, and can be recoated after 1 hour. The final coat becomes weatherproof in 1 hour.
What is the coverage rate of this paint?
The paint covers approximately 12 m² per litre.
What is the best way to apply this paint?
Application is best with a good quality synthetic brush, applied evenly in the direction of the woodgrain.
How do I prepare bare wood before painting?
Lightly sand with 120 grit sandpaper, wipe with white spirit, fill any imperfections with wood filler, and allow to dry.
How do I prepare previously painted wood?
Sand away loose paint down to the bare wood, then wipe clean with white spirit and a damp cloth.
What kind of finish does this paint provide?
This paint provides a durable gloss finish.
Troubleshooting
Paint is not adhering well
Ensure the surface was properly prepared, free from dust, grease, and old flaking paint. Lightly sand the surface before application and ensure it is clean and dry.
Uneven finish or brush marks visible
Ensure the paint is thoroughly stirred. Apply thin, even coats in the direction of the woodgrain using a good quality synthetic brush. Avoid overworking the paint.
Paint appears too thick or difficult to apply
Stir the paint well. If still too thick, ensure you are painting in appropriate temperature conditions; extreme cold can thicken paint. Do not add thinners unless explicitly recommended by the manufacturer for specific conditions.
Cracking or peeling after application
This usually indicates poor surface preparation or insufficient coats. Ensure all loose paint was removed and the surface was clean and dry. Apply the recommended number of coats for optimal protection.
Pros and Cons
Pros
Provides 10 years of guaranteed protection against common paint failures.
Eliminates the need for a primer, saving time and material costs.
Dries to touch and becomes weatherproof quickly, allowing for faster project completion.
Offers a robust gloss finish that enhances the look of exterior wood.
Suitable for various exterior wood applications like doors and windows.
Cons
May require 2-3 coats for optimal coverage and protection, especially on bare wood.
Surface preparation, including light sanding and cleaning, is essential for best results.
Application is best with a synthetic brush, which may require specific cleaning after use.
The paint needs to be stirred thoroughly before application.
Recoating time is one hour, which might be a limitation if multiple thin coats are needed.
Setup, Compatibility & Care Instructions
Preparation is Key:
Bare Wood: Lightly sand with 120 grit sandpaper for an even surface. Wipe down with white spirit to remove dust and any residues. Fill any holes or cracks with appropriate wood filler and allow to dry completely.
Previously Painted Wood: Sand away any loose or flaking paint down to the bare wood. An electric sander can be efficient for this. Wipe the surface clean with white spirit, followed by a damp cloth, to ensure it is free from dust and contaminants.
Application:
Stir Thoroughly: Before use, stir the paint well to ensure an even consistency.
Apply: Use a good quality synthetic brush. Apply the paint evenly in the direction of the woodgrain.
Coats: Apply 2 to 3 coats as needed. For bare wood, a third coat may be necessary if the grain is still visible after two coats.
Drying & Recoating:
The paint is dry to the touch in 1 hour.
It can be recoated after 1 hour.
The final coat will be weatherproof in 1 hour.
Care:
Clean brushes and equipment immediately after use with white spirit.
Store paint in a cool, dry place, away from direct sunlight and extreme temperatures.
Ensure the lid is tightly sealed when not in use to preserve the paint's quality.
Power Tools Direct£13.78Visit shop 
Amazon£17.89Visit shop 
eBay£24.99Visit shop 
