COOL IT Thermo-Tec Heat Sleeves - 1/2 Inch Diameter - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The COOL IT Thermo-Tec Heat Sleeves are designed for automotive enthusiasts, DIY mechanics, and professionals needing to protect vital wiring, cables, and hoses from extreme heat, liquid spills, and incidental flame exposure. Their key benefit is robust thermal and spill protection, ensuring longevity and safety in demanding engine bay environments. A potential caveat is their fixed 3-foot length, which may require joining for longer applications. These sleeves are constructed from high-quality braided fiberglass coated with silicone rubber, offering continuous protection up to 250°C and short-term resistance to 1200°C, available in various colors and diameters to suit different needs.
All features
| Colour | Black |
|---|---|
| Model Part Number | 18050 |
| Brand | COOL IT Thermo-Tec |
Extended Product Information
FAQs
What is the maximum continuous temperature the Heat Sleeves can withstand?
The COOL IT Thermo-Tec Heat Sleeves are designed for continuous heat protection up to 250°C (482°F).
Can these sleeves protect against direct flame contact?
Yes, they offer short-term protection against occasional exposure to flame, up to 1200°C (2192°F).
How are the Heat Sleeves sold?
They are supplied in convenient 3-foot lengths.
What materials are the Heat Sleeves made from?
They are constructed from high-quality braided fiberglass sleeving coated with a silicone rubber compound.
Are there different sizes available?
Yes, the Heat Sleeves are available in a range of diameters to suit various applications.
Can I cut the Heat Sleeves to size?
Yes, the sleeves can be easily cut to the required length using sharp scissors or a utility knife.
What is the purpose of the different color options?
The color options primarily serve for organization and aesthetics, allowing users to color-code different systems or match specific build themes.
Troubleshooting
Sleeve is too difficult to slide onto the component.
Ensure the correct diameter sleeve is being used. For a tighter fit, a small amount of silicone lubricant can be applied to the component or the inside of the sleeve. If the component cannot be disconnected, consider slitting the sleeve lengthwise.
Material seems to be degrading after exposure.
Verify that the component's operating temperature does not exceed the sleeve's continuous rating of 250°C. Ensure no direct flame impingement beyond short-term exposure limits. Check for contact with aggressive chemicals not specified in the product details.
Sleeve won't stay in place.
If a tight fit isn't achieved, use high-temperature resistant zip ties or specialized sleeving clamps to secure the ends of the sleeve. For applications where the sleeve was slit, use high-temperature adhesive tape to maintain a closed fit.
Pros and Cons
Pros
- Excellent heat resistance for engine bay protection.
- Durable material safeguards against spills and minor flame contact.
- Available in multiple sizes and colors for varied applications.
- Easy to install without disconnecting components.
- Helps maintain wire and hose integrity under harsh conditions.
Cons
- Sold in fixed 3-foot lengths, requiring piecing for longer runs.
- May not be suitable for continuous immersion in certain harsh chemicals.
- The outer coating can be cut, requiring careful handling during installation.
- Specific diameter needed for optimal fit, requiring measurement beforehand.
Setup, Compatibility & Care
Setup:
- Measure the section of wire, cable, or hose that requires protection.
- Cut the COOL IT Thermo-Tec Heat Sleeve to the desired length using sharp scissors or a utility knife.
- Slide the sleeve over the component. For components that cannot be disconnected, the sleeve can be slit lengthwise and then secured with high-temperature tape or zip ties if a closed fit is not achievable.
Compatibility:
- Compatible with most automotive, marine, and industrial wiring, cables, and hoses.
- Suitable for use around engines, exhaust systems, and other high-heat areas.
- Ensure the selected diameter provides adequate coverage without being overly restrictive.
Care:
- Clean with a damp cloth. Avoid harsh solvents or abrasive cleaners that could damage the silicone coating.
- Periodically inspect for any signs of wear, damage, or degradation, especially after exposure to extreme conditions. Replace if compromised.