Digital Audio Cable - Lindy - 1m - Gold

This cable is designed to carry digital audio signals via the RCA (Phono) connector. It is suitable for digital coaxial audio connections.

While the RCA connector is also used for analog audio, this cable is specifically optimized for digital audio transmission. For analog stereo audio, a separate set of analog RCA cables would be more appropriate.

It means the cable's outer jacket and inner insulation are made from materials that do not contain Polyvinyl Chloride (PVC) or halogens. This is an environmentally friendlier design that limits the use of potentially harmful additives found in traditional cable manufacturing.

This Lindy cable comes with a 10-year warranty.

The connectors are standard RCA (Phono) type, with a low profile design to ensure they fit easily into ports, even when adjacent ports are occupied.

Typically, turntables require a phono pre-amplifier. This cable is for digital audio signals. If your turntable or amplifier has specific digital audio connections that use RCA, then it might be applicable, but for standard analog phono connections, this is not the correct cable.

The cable utilizes copper for its inner conductors to ensure good signal transmission.

Ensure both RCA connectors are securely plugged into the correct input/output ports on your devices. Verify that the correct audio source is selected on your receiving equipment and that the audio output setting on your source device is configured for digital audio. Test with another known working audio cable.

Check for any damage to the cable or connectors. Ensure the connectors are clean and free of debris. A poor connection or a damaged cable can cause interference. If the issue persists, try a different cable.

While designed to be flexible, in very cold conditions, the TPE jacket may become less pliable. Allow the cable to warm to room temperature before attempting to route it. Avoid forcing the cable into tight bends.