Best current price£66.84from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£66.84Visit shop Sika Resiblock Superior Block Paving Sealer Natural 5 L
Visit shop
eBay£70.99Visit shop Resiblock Superior Block Paving Patio Sealer Bond Jointing Protect in Matt 5ltr
Visit shop
B&Q£79.49Visit shop B&Q - Superior Matt5LWorld Leading Block Paving Sealer With A No Oil Stains Guarantee
Visit shop11 offers from £66.84 - £136.85
View price history by clicking the chart icon.
This guide is for homeowners and contractors looking to protect and enhance concrete block paving. Resiblock Superior Matt provides a durable, natural finish that lasts up to 5 years, preventing weeds and stains. A key caveat is the requirement for the surface to be completely dry and free from dirt before application.
| Colour | Brown |
|---|---|
| Model Part Number | 119626 |
| Brand | Everbuild |
Resiblock Superior Matt is specifically designed for use on Concrete Block Paving Only. It is not suitable for other types of paving such as natural stone or tarmac.
The sealer provides protection that can last up to 5 years, depending on traffic and environmental conditions.
No, you must ensure there is no risk of rain for at least 8 hours after application to allow the sealer to cure properly.
The coverage rate is approximately 1 litre per 3m² for the first coat and 1 litre per 6m² for the second coat.
Two coats are recommended for optimal protection against fuel and water infiltration. A minimum of 3 hours and a maximum of 24 hours should pass between coats. One coat is sufficient for clay pavers.
All uncured sealant and tools should be cleaned immediately using RESICLEAN.
No, do not apply in extreme temperatures. The ideal application temperature range is between 3°C and 30°C.
Always wear protective gloves and goggles. A mask is recommended when working in confined areas. Please refer to the current MSDS for full safety information.
This can occur if applied too thickly or if the temperature dropped significantly after application. Ensure correct coverage rates are used and avoid application in extreme temperatures. Allow longer for curing.
Ensure the jointing sand was fully stabilised by the sealer. This requires thorough application, especially on the first coat, and ensuring no jointing sand remained in the chamfers before application. Reapplication might be necessary if coverage was inadequate.
Likely due to inconsistent application or not removing surplus liquid effectively. Ensure even distribution and immediate removal of excess with a squeegee during application.
This usually indicates poor adhesion. Ensure the surface was completely dry and free from dirt and contaminants before application. Avoid application on non-concrete block paving materials.
Can be caused by moisture trapped beneath the sealer, often due to applying in damp conditions or if rain occurred too soon after application. Ensure the surface is bone dry and protected from rain for the recommended period.
Preparation is Crucial:
Application Conditions:
Application Process:
Post-Application:
Safety Precautions:
Cleaning:
Compatibility:
