Rust-Oleum Metallic Spray Paint - Copper - 400ml

The paint dries to the touch in approximately 24 hours. Full cure may take longer depending on environmental conditions.

It is suitable for wood, metal, plaster, masonry, and hard plastic surfaces. Always test on a small, inconspicuous area first.

After use, invert the can and spray for 5-10 seconds. If still clogged, remove the nozzle, soak it in a solvent like lacquer thinner, and rinse thoroughly before reattaching.

Yes, this spray paint provides a corrosion-resistant finish suitable for both interior and exterior use.

The average coverage is approximately 2.5m² per litre. A 400ml can will cover roughly 1m² depending on the application thickness.

While not always mandatory, priming can improve adhesion and finish, especially on difficult surfaces or for very vibrant results. Always ensure the surface is clean and dry.

Store the can in a cool, dry place away from heat sources and direct sunlight. Ensure the cap is securely sealed after each use.

Shake the can more vigorously. Ensure the nozzle is not clogged. If clogged, remove and clean it as per instructions.

You may be holding the can too close or applying the paint too heavily. Apply in thinner coats from a greater distance. Remove runs with a brush dipped in solvent and reapply.

Ensure the surface was properly prepared (clean, dry, sanded if necessary) before application. Check for compatibility with the surface material.

Ensure adequate drying time between coats and that the can was shaken sufficiently. A final clear coat might enhance the metallic sheen if desired.