Sadolin Beautiflex Solvent Opaque Woodstain - White - 2.5L

It is suitable for all exterior wood, including new timber, previously painted surfaces, and previously stained wood. It's ideal for features like window frames, doors, cladding, and garden furniture.

It offers up to 7 years of protection on most exterior wood. Please note that the protection period for decking is shorter due to higher wear and tear.

Apply when the temperature is between 5°C and 25°C, and avoid periods of high humidity or when rain is expected. Ensure the wood surface is clean, dry, and well-prepared.

Clean your brushes immediately after use with a proprietary brush cleaner. Do not allow the product to dry on the equipment.

Yes, the opaque finish is excellent for transforming weathered or faded wood and achieving a significant colour change.

You should allow between 16 to 24 hours between coats, depending on the ambient temperature and humidity.

Yes, it can be used on decking, but the protective lifespan is shorter than the 7 years offered on other exterior wood surfaces due to the high wear and tear on decking.

Ensure the product is well-mixed and applied evenly with consistent brush strokes. Work with the grain and avoid over-brushing. Ensure the surface is properly prepared and smooth.

This usually indicates inadequate surface preparation or application in unsuitable conditions. Ensure the wood was clean, dry, and free from contaminants. Check that application temperatures were within the recommended range (5°C-25°C) and humidity was not excessively high. For existing peeling, remove loose coating, prepare the surface, and reapply.

Ensure the product has been stored correctly. Very cold conditions might thicken it slightly; allow it to acclimatize to room temperature. Avoid adding thinners unless specifically recommended for extreme conditions by the manufacturer, as this can affect performance.

Drying times are dependent on temperature and humidity. If drying is unusually slow, it may be due to low temperatures or high humidity. Ensure adequate ventilation in the drying area if possible.