Ryobi One+ 18V Cordless Angle Grinder - 115mm - RAG18115-0

The Ryobi One+ 18V Cordless Angle Grinder requires an 18V ONE+ battery from Ryobi. A battery and charger are not included.

Ensure the tool is off and the battery is removed. Consult the user manual for specific instructions on using the tool-less blade guard.

Always wear safety glasses, gloves, and a dust mask when operating the angle grinder. Ensure the work area is clear of obstructions.

Yes, this grinder can be used for cutting tiles, but ensure you use the appropriate blade designed for tile cutting and wear the appropriate safety gear.

The two-stage switch requires two actions to start the grinder. This feature enhances safety by preventing accidental starts.

With a 5ah battery, you can get up to 68 cuts of a 13mm threaded bar. However, this can vary based on the battery and the material.

Replacement discs are available at most hardware stores or online retailers that sell Ryobi products.

Clean the tool after each use. Remove dust and debris from the vents. Inspect and replace worn discs. Store the tool in a dry place.

Ensure the battery is properly inserted and charged. Check the switch to make sure it is fully engaged.

Check the battery charge level and replace the battery if low. Inspect the grinding disc for wear or damage.

Check if the grinding disc is properly secured. Ensure that the disc is not damaged. Use appropriate safety gear and maintain a firm grip.