Origin Murals Graphic Mountains - Grey

You'll need wallpaper paste (suitable for non-woven wallpaper), a smoothing tool, a level, a measuring tape, a sharp knife or trimming tool, and a damp cloth.

While the mural is durable, it's best suited for areas with low humidity. Avoid installing it in a bathroom with direct water exposure or high humidity.

Measure the width and height of the wall you intend to cover. The mural is 3m wide by 2.4m high. Make sure your wall dimensions fit within these measurements.

The mural works best on smooth, clean, and dry walls. Ensure the surface is prepared and free from imperfections before application.

It's best to position the panels accurately during the initial application. While slight adjustments may be possible, repositioning can potentially damage the mural. Work carefully, using a level and measuring tape to align panels correctly the first time.

To remove the mural, dampen the wall with warm water, let it soak for a few minutes, and then gently peel off the panels. Depending on the wall surface, you might need a wallpaper stripper solution for easier removal.

Double-check the alignment during installation. Ensure each panel is placed correctly against the adjacent one. If necessary, reposition the panels before the paste dries.

Use a smoothing tool to gently push the air bubbles towards the edges of the panel. For stubborn bubbles, carefully pierce them with a pin and smooth the paper.

Wipe away any excess paste immediately with a clean, damp cloth. Avoid letting the paste dry on the surface of the mural.