Tacwise Coil Nails - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for construction professionals and DIY enthusiasts who need reliable fasteners for heavy-duty applications. The Tacwise 0424 55mm Bright Flat Top Coil Nails offer exceptional holding power in demanding situations, but users should always verify tool compatibility before purchasing. These nails are designed for high-volume use in tasks like cladding, pallet building, and timber framing.
All features
| Colour | Silver |
|---|---|
| Brand | Tacwise |
Extended Product Information
FAQs
What does 'Bright' mean for these nails?
'Bright' refers to the finish of the nail, indicating it is uncoated steel. These are suitable for interior or protected exterior applications where corrosion is not a primary concern.
Are these nails suitable for outdoor use?
For general outdoor use, they can be suitable if the wood is treated or protected. For prolonged exposure to elements, corrosion-resistant nails (like galvanized or stainless steel) are recommended.
What is a 'Ring Shank'?
A ring shank nail has ridges or rings around its shaft. This design significantly increases withdrawal resistance, meaning the nail is less likely to loosen over time.
How do I know if my nailer is compatible?
Check your nailer's manual for specifications regarding nail collation angle (16°), nail head type (flat top), shank diameter (2.5mm), and length (55mm). The product description lists compatible Tacwise and other model ranges.
What is the purpose of the 'Diamond Point'?
The diamond point is a sharp, multi-faceted tip designed to penetrate wood more easily, reducing the chance of splitting the material and requiring less force to drive the nail.
Can I use these nails for very fine woodworking?
These nails are designed for heavy-duty construction and framing. For fine woodworking, smaller gauge, different collation types, or adhesive fasteners are generally more appropriate.
How many nails are in one coil?
Each coil contains 300 nails.
Troubleshooting
Nails not driving fully
Check tool's air pressure (if pneumatic) or battery charge (if electric). Ensure the correct nail collation angle (16°) is set for your tool and the nails are loaded correctly.
Tool jamming
Verify you are using the correct size and type of nail (2.5x55mm flat top). Ensure the nail magazine is clean and free of debris. Check that the nails are not damaged or bent before loading.
Poor holding power
Confirm the nail length is appropriate for the material thickness. Ensure the ring shank is fully embedded. Check if the wood density is too low for effective grip.
Nail head proud of surface
Adjust the depth setting on your nailer. Ensure the driver blade is clean and not worn. The flat top design is intended for specific applications; ensure it's suitable for your finish requirements.
Pros and Cons
Pros
- Provides exceptional hold strength for heavy-duty applications.
- Diamond point allows for easy material penetration.
- Ring shank design enhances grip and reduces withdrawal.
- Large pack size (9000 nails) offers good value for high-volume projects.
- Compatible with a wide range of Tacwise and other leading coil nailer brands.
Cons
- Bright, untreated finish may be susceptible to corrosion in very damp environments without additional protection.
- Requires a specific type of coil nailer (16° incline, flat top) for optimal performance.
- Pack size of 9000 may be excessive for small DIY tasks.
- Diamond point can sometimes mark softer woods if not handled carefully.
Setup, Compatibility & Care
Compatibility Check:
Before loading, always ensure your nail gun is compatible with 2.5mm x 55mm flat top coil nails and a 16° incline. These nails are confirmed compatible with:
- Tacwise: FCN55V, FCN57V, HCN65P, FCN65V, GCN70V, HCN83P, JCN90XHH
- Other brands: Bostitch, Makita, and other coil nailers accepting 2.5/55mm flat top nails.
Loading the Nailer:
- Ensure the tool is disconnected from its power source.
- Open the magazine of your coil nailer.
- Insert the coil of nails, ensuring the angled head of the nailer aligns correctly with the 16° incline of the nails.
- Close the magazine securely.
Care:
These are bright, untreated nails. For applications exposed to moisture or the elements, consider using stainless steel alternatives or applying a protective coating to the fastened material to prevent corrosion over time. Store nails in a dry environment to maintain their condition.