Window Film - Grey

The film is best suited for smooth, clean, and non-porous glass surfaces. Avoid applying it to textured, uneven, or damaged glass, as it may not adhere correctly or could cause further damage.

Yes, the film can typically be removed by peeling it away from the glass. If residue remains, it can usually be cleaned with warm, soapy water or a glass cleaner.

This specific product description does not mention UV blocking properties. Its primary functions are privacy and decoration.

The grey film provides opaque privacy, meaning it makes the window appear frosted and blocks direct visibility. It will reduce light transmission compared to clear glass, but it still allows diffused natural light to enter.

This window film is intended for indoor application only. Applying it to the exterior may expose it to harsh weather conditions, reducing its lifespan and effectiveness.

The grey film is opaque, providing full privacy. It is frosted in appearance and not transparent.

Gently lift the edge of the film near the bubble/wrinkle and reapply using the squeegee, ensuring all soapy water is pushed out. For stubborn bubbles, you can try piercing them with a fine needle and smoothing the air out.

Ensure the glass surface was thoroughly cleaned and lightly dampened with soapy water before application. Re-clean the glass and reapply the film.

Use a sharp, new craft knife or utility blade and a straight edge for precise cutting. Ensure the film is laid flat on a cutting mat or protected surface.

Ensure the edges were sealed properly during application. You may need to re-trim the edge and reapply pressure with the squeegee.