Gorilla Waterproof Patch & Seal Tape - 100mm x 3m

The tape adheres to a variety of surfaces, including roofing materials, window frames, gutters, drainage pipes, tarpaulins, and camping equipment. Always test on an inconspicuous area first.

Yes, the tape has a UV-resistant backing, making it suitable for both interior and exterior applications.

The tape is designed to be waterproof but is not recommended for constant submersion. It works best when applied to a dry or slightly wet surface.

Removing the tape can be difficult due to its strong adhesive properties. You may try using a heat gun or a solvent such as mineral spirits to soften the adhesive before attempting removal.

When stored properly in a cool, dry place, Gorilla Waterproof Patch & Seal Tape has a long shelf life. However, its effectiveness may decrease over time if not stored correctly.

No, Gorilla Waterproof Patch & Seal Tape is typically available in a limited range of colors.

Store the tape in a cool, dry place, away from direct sunlight and extreme temperatures, to maintain its adhesive properties.

Ensure the surface is clean, dry, and free of debris. Use rubbing alcohol to clean the surface. Press the tape firmly, smoothing out any air bubbles.

Make sure the tape overlaps the damaged area by at least 1 inch on all sides. Use a heat gun to activate the adhesive. Press the edges firmly to ensure a complete seal.

Check for air bubbles or gaps. Reapply the tape, ensuring a tight seal, and that it overlaps the damaged area sufficiently.