KA Tanking Slurry Waterproofing Solution - Grey

Coverage rates vary depending on the surface and application method. Refer to the product instructions for specific details.

No, KA Tanking Slurry is specifically designed for use on concrete, masonry, and blockwork.

Curing time depends on temperature and humidity, but generally, it takes several days for complete curing. Refer to the product instructions for specific curing times.

It is recommended to remove existing coatings before applying KA Tanking Slurry for optimal adhesion. Ensure the surface is properly prepared.

Yes, KA Tanking Slurry has potability approval and is safe for use in fish ponds and other aquatic applications.

Wear appropriate personal protective equipment (PPE), including gloves, eye protection, and a dust mask. Ensure adequate ventilation during application.

Clean tools and equipment with water immediately after use.

The shelf life of the product is typically 12 months from the date of manufacture when stored in a cool, dry place. Refer to the product packaging for the expiration date.

Ensure the surface is properly prepared, clean, and dampened before application. The slurry mix may be too thick; add a small amount of water to adjust the consistency.

Ensure the application meets the specified thickness. Additional coats may be required. Check for any untreated areas or pinholes.

Avoid applying the slurry in direct sunlight or freezing temperatures. Ensure proper curing conditions and that the surface is not subject to extreme temperature changes during the curing process.

Ensure the surface is fully cured and protected from direct water exposure. Efflorescence can occur if the substrate contains soluble salts.