Best current price£10.09from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£10.09Visit shop 10 X Flat Joining Plates (80 X 40 X 2) Connecting Perforated Metal Brace Bracket Timber Wood Fixing Galvanised Steel Repair Connector 601754990946
Visit shop8 offers from £10.09 - £37.99
View price history by clicking the chart icon.
The OMIDEAS Flat Joining Plates are essential hardware for DIY enthusiasts, woodworkers, and contractors looking to create durable, flush timber connections. These 80x40x2mm steel plates provide exceptional structural reinforcement for furniture assembly and general wood framing, offering a high load-bearing capacity thanks to their robust galvanised finish. Users should be aware that this pack does not include mounting screws, necessitating a separate purchase based on the specific thickness of the wood being joined.
| Colour | Silver |
|---|---|
| Model Part Number | OMIDEAS10xFlatJoiningPlates(80x40x2)ConnectingPerforatedMetalBraceBracketTimberWoodFixingGalvanisedSteelRepairConnector |
| Brand | OMIDEAS |
Yes, the galvanised steel construction provides excellent corrosion resistance suitable for most outdoor environments.
The holes are 5mm in diameter, so standard wood screws with a 4mm to 4.5mm shank are recommended.
No, this pack contains only the 10 joining plates; screws must be purchased separately.
Yes, you can paint them to match your project, though it is recommended to use a metal primer first to ensure the paint adheres to the galvanised surface.
Each plate is 2mm thick, providing a rigid and durable connection.
Use screws with a smaller head diameter or use a countersink bit to accommodate the screw head slightly.
Ensure the timber surfaces are level and flush before tightening; if there is a gap, the plate will pull to conform, which may cause bending.
To install these plates, first ensure your wooden surfaces are aligned and clamped in place. Position the plate centered across the joint and mark the 8 holes using a pencil. It is recommended to pre-drill pilot holes into the wood to prevent splitting, especially when working with hardwoods. Select screws with a gauge appropriate for the 5mm hole diameter and a length that does not penetrate through the opposite side of your timber. Maintenance is minimal; simply check the screws for tightness annually, especially in outdoor settings where wood may shrink or expand with moisture changes. If the surface is exposed to salt air, a light coat of clear exterior-grade paint can further extend the life of the galvanised coating.
