Tikkurila Miranol - Ultra High Gloss Paint For Wood & Metal - Litre Size 1

Tikkurila Miranol is suitable for use on both metal and timber surfaces, making it a versatile choice for a range of projects.

Recoating time is typically 24 hours.

Yes, Miranol is suitable for exterior use. Ensure the surface is properly prepared and primed.

Miranol can be applied with a brush, roller, or spray. Choose the method that best suits your project and experience.

Use an appropriate primer designed for alkyd paints. Consult with your paint supplier for specific recommendations based on the surface you are painting.

Two coats are usually recommended for the best results, but the exact number may vary depending on the surface and the desired finish.

Clean brushes with a suitable solvent, such as white spirit, immediately after use.

Due to the tinting process, the volume in the can is 10% less than the unit of measure to allow for tinting.

Apply thinner coats and avoid overloading the brush or roller. Ensure proper application technique.

Ensure adequate ventilation and that the ambient temperature is within the recommended range (typically 18-24°C). Check the expiry date of the paint.

Ensure you are using the correct application technique and apply multiple thin coats. Also, make sure the surface has been properly primed.

Use a high-quality brush and apply the paint smoothly. Avoid over-brushing and lightly sand between coats.

Make sure the surface has been thoroughly cleaned and sanded to promote adhesion. Use a suitable primer.