The CDA EIN60FSI 60cm extractor is integrated for a seamless look in your kitchen. It features 3 s...The CDA EIN60FSI 60cm extractor is integrated for a seamless look in your kitchen. It features 3 speeds with slider controls and a built-in LED light for hob illumination. The hood supports ducted or re-circulating installation and includes an aluminium grease filter. Its technical specifications include a 3A power supply, 120mm outlet diameter, and a motor input of 45W. The rated electrical power is 49W. For installation, a minimum height of 700mm over gas hobs and 600mm over electric hobs is required. Optional accessories like ducting kits (AED 51/53/54) and charcoal filters (CHA15) are available. The lighting is provided by a 4W LED. Extraction rates range from 106 m3/hr at first speed to 193 m3/hr at third speed, with noise levels from 47 dBA to 62 dBA. The energy efficiency class is B.
This guide is for users of the CDA EIN60FSI integrated cooker hood, designed to provide effective ventilation while seamlessly integrating into your kitchen design. The key benefit is its ability to remove smoke, grease, and odors with a maximum extraction power of 193 m³/h. However, note that while it offers both ducted and recirculating options, the efficiency and performance can vary based on the chosen installation method.
All features
Colour
Grey
Energy Efficiency
B
Model Part Number
EIN60FSI
Brand
CDA
Extended Product Information
FAQs
How do I clean the grease filter?
The aluminum grease filter can be removed and cleaned either by hand with warm, soapy water or in a dishwasher.
How often should I replace the charcoal filter?
Charcoal filters should be replaced every 3 to 6 months depending on usage.
What is the correct height to install the cooker hood?
Install the hood at a minimum height of 700mm above gas hobs and 600mm above electric hobs.
What type of light bulb does the hood use?
The hood uses a halogen bulb.
Can I use this hood in recirculating mode?
Yes, the hood supports both ducted and recirculating modes. You will need to install charcoal filters for recirculating mode.
What should I do if the hood is not extracting properly?
Check and clean the grease filter and ensure that the ducting is not blocked (if ducted). Check the extraction speed setting.
What is the power supply requirement?
The cooker hood requires a 3A power supply.
Where can I find replacement filters?
Replacement charcoal filters (CHA15) can be purchased from various appliance retailers or online.
Troubleshooting
Cooker hood doesn't turn on.
Check the power supply and ensure the unit is correctly plugged in. Also, check the fuse.
Extractor fan is not extracting effectively.
Check the grease filter for blockages and clean it. Ensure the ducting is not blocked (if ducted).
Lights are not working.
Check the bulb and replace if necessary. The bulb type is halogen.
The cooker hood is too noisy.
Ensure that the hood is installed correctly and that the ducting is properly connected (if applicable). Check the speed setting; lower speeds are quieter.
Unpleasant odors persist after cooking.
Ensure that the charcoal filters (if installed) are not saturated and replace them if needed. Clean the grease filter.
Pros and Cons
Pros
Seamless integration into kitchen designs.
Multiple speed settings for varied cooking requirements.
Offers both ducted and recirculating installation options.
Includes an LED light for hob illumination.
Features an aluminium grease filter for effective grease removal.
Energy efficient with a B rating.
Cons
Extraction efficiency can be affected by the installation method.
The maximum extraction rate of 193 m³/h might not be sufficient for very heavy-duty cooking.
Halogen bulb may need replacing.
Requires professional installation for ducted configurations.
Grease filter requires regular cleaning.
Noise levels can reach up to 62 dBA at high speed.
Setup, Compatibility & Care
Installation: The CDA EIN60FSI can be installed in either ducted or recirculating mode. For ducted mode, the hood vents externally; for recirculating mode, it filters the air and releases it back into the kitchen. Ensure the correct ducting or charcoal filters (CHA15) are used for your chosen installation method.
Height Requirements: Install the hood at a minimum height of 700mm above gas hobs and 600mm above electric hobs.
Electrical: The unit requires a 3A power supply.
Compatibility: This cooker hood is compatible with various kitchen designs due to its integrated design.
Care and Maintenance:
Cleaning: Clean the exterior surfaces with a damp cloth and mild detergent.
Grease Filter: Remove and clean the aluminium grease filter regularly (every 2-4 weeks) to maintain its efficiency. These are dishwasher-safe.
Charcoal Filters: If using charcoal filters, replace them as recommended by the manufacturer (typically every 3-6 months) for optimal odor removal.