Shopping.co.uk

ARCTIC ACALP00040A - Silver

ARCTIC ACALP00040A - Silver

Arctic AcALP00040A Alpine 17 compact Intel cPU cooler

Best current price£40.20from OnBuy.com

Colour
BlackSilver

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £40.20

View price history by clicking the chart icon.

OnBuy.comCpucl Arctic Acalp00040a R 840033401708
Free delivery in 1–3 days
£40.20
Visit shop

Product Information

Full details

The ARCTIC Alpine 17 is a compact air cooler designed for Intel LGA 1700 socket processors, offering a straightforward cooling solution for everyday computing tasks. Its primary benefit is easy, tool-free installation and quiet operation, especially at lower RPMs. However, its compact size means it's best suited for less demanding CPUs and may not be ideal for high-performance gaming rigs or overclocking scenarios where heat dissipation is critical.

All features

ColourSilver
Model Part NumberACALP00040A
BrandARCTIC

Extended Product Information

FAQs

What processors is the ARCTIC Alpine 17 compatible with?

The Alpine 17 is specifically designed for Intel processors using the LGA 1700 socket, which includes the 12th Gen (Alder Lake) and newer compatible CPUs.

Does it come with thermal paste pre-applied?

Yes, the cooler comes with ARCTIC's MX-4 thermal paste pre-applied, allowing for direct installation without needing to purchase or apply separate paste.

How quiet is this cooler?

The noise level is rated at 0.3 sone, and thanks to PWM control, it can operate very quietly at low RPMs during idle or light loads. Noise levels increase with fan speed under heavy load.

Is this cooler suitable for gaming PCs?

It can be suitable for entry-level gaming PCs with less demanding CPUs. However, for high-end gaming or systems that generate significant heat, a more powerful cooler is recommended to maintain optimal temperatures and performance.

What is the TDP rating for this cooler?

The ARCTIC Alpine 17 has a Thermal Design Power (TDP) rating of 95W, making it suitable for processors within this thermal envelope.

Can I replace the fan with a different one?

While technically possible, the cooler is designed as a unit. Replacing the fan would require careful detachment and reattachment, and compatibility with other fan sizes or mounting systems is not guaranteed.

What type of fan bearing does it use?

It uses a Fluid Dynamic Bearing (FDB), known for its quiet operation, longevity, and reduced wear compared to sleeve or ball bearings.

Troubleshooting

Cooler not spinning

Verify the 4-pin fan cable is securely connected to the CPU_FAN header on the motherboard. Check BIOS settings to ensure the fan header is enabled and configured correctly.

High CPU temperatures

Ensure the cooler is properly seated on the CPU with all mounting pins secured. Check if the thermal paste was applied evenly and without gaps. Clean dust from the fan and heatsink. For demanding tasks, consider upgrading to a higher-performance cooler.

Noise from the fan

Check fan speed settings in BIOS. Lowering the maximum RPM can reduce noise. Ensure no cables are obstructing the fan blades. The Fluid Dynamic Bearing is designed for quiet operation, but excessive noise might indicate a faulty unit or obstruction.

Difficulty installing push pins

Ensure the pins are correctly aligned with the motherboard mounting holes. Apply firm, even pressure directly on the center of each pin until it locks. If resistance is too high, double-check alignment and ensure no obstructions.

Pros and Cons

Pros

  • Easy and tool-free installation process.
  • Quiet operation, especially at lower fan speeds.
  • Compact size fits well in smaller PC builds.
  • Fluid Dynamic Bearing for longevity and reduced noise.
  • PWM control offers flexible fan speed management.
  • Specifically designed for Intel LGA 1700 processors.

Cons

  • Limited cooling capacity for high-TDP processors.
  • Not suitable for overclocking or demanding workloads.
  • Stock thermal paste may be outperformed by aftermarket options.
  • Can be slightly more expensive than some basic stock coolers.
  • Performance may be noticeably lower under sustained heavy load.

Setup, Compatibility & Care

Compatibility:

  • Socket Support: Exclusively designed for Intel processors with the LGA 1700 socket.
  • Case Clearance: Its compact height of 77 mm makes it compatible with most standard and small form factor PC cases.

Setup:

  1. Ensure your motherboard has an LGA 1700 socket.
  2. Carefully align the cooler's mounting pins with the corresponding holes around the CPU socket on the motherboard.
  3. Gently press down on the top of each push pin until it clicks into place, securing the cooler firmly.
  4. Connect the 4-pin fan cable to the CPU_FAN header on your motherboard.
  5. *Note:* The cooler comes with pre-applied thermal paste; do not touch or remove it unless reapplying.

Care:

  • Cleaning: Periodically clean the fan blades and heatsink fins to remove dust buildup. Use compressed air or a soft brush. Ensure the system is powered off and unplugged before cleaning.
  • Thermal Paste: For optimal performance, consider reapplying thermal paste every 2-3 years or if you notice a significant increase in CPU temperatures. Use a high-quality thermal paste like ARCTIC MX-4.

Price History

DatePrice
Visit shop