HAY Host Portable Rechargeable Lamp - 22cm - Iron Red

The Host Portable 220 model provides a minimum of 8 hours of light per charge, while the Host Portable 300 model offers a minimum of 16 hours. Actual battery life may vary based on the brightness setting used.

Yes, the lamp has an IP44 rating, making it suitable for protected outdoor environments such as covered patios or balconies. It is not designed for direct exposure to heavy rain or extreme weather.

The lamp is rechargeable via USB-C. Connect a USB-C cable to the lamp's charging port and a compatible USB power source. A USB-C cable may not be included with all purchases.

Yes, the lamp features an integrated dimmer that allows you to adjust the light intensity to your preference.

The magnetic base securely attaches to any ferrous metal surface. For non-magnetic surfaces like wood or ceramic, the included flat steel base can be used.

The permanently installed LED light source provides a pleasant warm white light with a colour temperature of 2,700 Kelvin.

Sleep Mode can be activated for safe transport or when the lamp is not in use for extended periods. Refer to the product manual for specific activation instructions, as it typically involves a sequence of button presses.

Ensure the lamp is fully charged. Check the USB-C connection and try a different charging source. Activate the lamp by pressing the power button.

Check if the dimmer is set to the lowest setting. Increase the brightness level by adjusting the dimmer control. Ensure the battery is sufficiently charged.

Ensure the metal surface is clean and free of dust or debris. Test on a different, stronger magnetic surface if possible. The magnet is designed for secure attachment, but surface material and thickness can affect holding power.

Verify that the USB-C cable is properly connected to both the lamp and the power source. Try a different USB-C cable and power adapter to rule out faulty accessories. Ensure the charging port is clean.

This may indicate a low battery. Charge the lamp fully. If the issue persists with a full charge, contact customer support.