Power Cord - Kenable - White

A C5 coupler, often called a 'clover leaf' connector, is a three-pin female connector found on the power input of some electronic devices, shaped like a rounded triangle or a shamrock.

This cable will work if your laptop's original power adapter or the laptop itself has a C5 'clover leaf' power input socket. It is not compatible with standard figure-8 or kettle lead power sockets.

The 5A fuse in the UK plug is a safety feature designed to protect the device and prevent electrical hazards by blowing and cutting off power in case of a significant overcurrent or fault.

This cable is designed for typical power loads of devices like laptops and projectors. It's recommended to check the power rating of your specific appliance against the cable's specifications, though it is generally suitable for the intended uses.

The cable length is 1.8 meters.

A C5 connector is the 'clover leaf' type, typically used for lower-power devices like laptop power bricks. A C13 connector (kettle lead) is a larger, three-pin connector commonly used for desktop computers, monitors, and other higher-power equipment.

This cable is intended for indoor use only. Exposure to moisture or outdoor elements can damage the cable and create a safety hazard.

Ensure the C5 connector is fully inserted into the device and the UK plug is securely in the wall socket. Verify the wall socket is functional by testing with another appliance. Check that your device requires a C5 input and not a different connector type.

Inspect both the C5 connector and the UK plug for any dirt or damage. Ensure they are clean and making good contact. Gently wiggle the connectors to check for a loose connection; if loose, the cable may need replacement.

This is unusual for standard operation. Immediately unplug the cable and device. Ensure the cable is not damaged and that the device's power requirements do not exceed the cable's rating (typically fine for laptops/projectors). If the issue persists, discontinue use and replace the cable.